? CURTIS柯蒂斯電控，控制器多重自動保護系統。
? EPS轉向能耗降低~20%，作業，降低了駕駛員疲勞度，大幅提升生產力。
? 前移式電動堆高車適用于大噸位、高起升的貨物存儲應用，適用多種托盤，具有門架整體前移的特點，轉彎半徑小，可忽略貨架底層的障礙，可適合窄通道使用。
? 提升操縱桿處于安全下降位置，貨叉在降至離地面10cm時下降速度自動減慢，有效防止貨物因震動而受到損傷。貨叉上升至處時，緩沖系統使得門架震動減小，提升了操作者舒適度。
? 踏板上腳踏斷電開關，控制車輛運行，只有在踩下腳踏斷電開關后，才可以操作車輛行駛，反之車輛則停止運行，該設計提高了整車的安全性能。
? 48V大功率電池，長久的續航能力和電池使用壽命。 
?  Because of CURTIS electronic control, so we have multiple automatic protection system controllers.
?  EPS swerve can reduce 20% of the energy consumption. It is precise, flexible, and convenient to operate. At the same time, it can reduce driver fatigue, boost productivity.
?  Moved forward type electric stacker is suitable for large tonnage, high hoisting cargo storage applications，applying to a variety of trays, and has the characteristics of moving forward for overall door frame. Furthermore, it has small turning radius and can neglect obstacles from the bottom of the shelf. So it is suitable for narrow channel.
? During the operation of decline, the pallet fork is kept in safe when hoisting control lever is in decline position. Especially when pallet fork drop to 10 cm above the ground, then speed will slow down automatically. It can effectively protect the goods from damage due to vibration. When the pallet fork goes to the top, buffering system can reduce the vibration of the door frame. So it is comfortable for operator.
?  Placing your feet on electric breaking switch, then you can take control of the driving. Only after the foot stepped on power switch can operate vehicle, whereas the vehicle stop. So this design improves the vehicle's safety performance. 
?  It is endurable and has long battery life because of 48V high power battery.

安徽宇鋒相關證書

?特種設備制造許可證，即TS認證。是指******質量監督檢驗檢疫總局對特種設備的生產（含設計、制造、安裝、改造、維修等項目）、使用、檢驗檢測相關單位進行監督檢查，對經評定合格的單位給予從業許可，授予使用TS認證標志的管理行為。無此證車輛無法上牌（未經允許不得它用）；

?型式試驗合格證，對于特種設備來說，型式試驗是取得制造許可的前提，試驗依據是型式試驗規程或型式試驗細則，無此證車輛無法上牌（未經允許不得它用）；

?CE認證，“CE”標志是一種安全認證標志，被視為制造商打開并進入歐洲市場的護照。CE代表歐洲統一（CONFORMITE EUROPEENNE）（未經允許不得它用）；

?ISO9001質量體系認證，凡是通過認證的企業，在各項管理系統整合上已達到了標準，表明企業能持續穩定地向顧客提供預期和滿意的合格產品。（未經允許不得它用）